Payment & Shipping Terms:
|Apply:||Transformer Oil Regeneration||Capacity:||600 To 20000 Liters Per Hour Optional|
ZYD-I High Efficiency Double Stage Vacuum transformer oil regeneration plant completely purify and regenerate insulating oils in energized or de-energized transformers on site. It is a high efficiency multi-function purification machine designed for filtering, heating, drying, reclamation and degassing of contaminated insulating oil used in transformers, mutual inductors, circuit breakers and switches. Besides regular oil purification including degassing, drying and particulate removal, it also removes acid, sludge, other soluble oil decay products and improve dielectric strength as well as the oil color.
The HOPU ZYD-I unit is designed to carry out the operations of filtration, dehydration, absorption of dissolved gases, regeneration in a transformer for energized and non- energized transformers either for their filling up with oil or for their Periodic maintenance. This oil treatment plant is being capable to re- improve the power transformer oil characteristics up to the recommended value IEC- 156 standard.
This machine utilizes a physiochemical reaction to eliminate the acidic component, the suspended particles and the sedimentation material etc. from the oil, it mainly used to decolor and reduce the bad odor from the transformer oil, hydraulic oil, turbine oil, base oil ,refrigerant oil , kerosene, switch oil and other lube oil to limpid clean oil (the color will be transparent).
1. This machine utilizes a physiochemical reaction to eliminate acidic component, suspended particles and sedimentation material etc. from inferior oil, it mainly used to regenerate the unqualified transformer oil and circuit breaker oil.
2. It adopts a particular purification chemical to decolor the transformer oil, lubricating oil and hydraulic oil, which can operate under the situation of transformer stays running in normal manner without cutting power or changing oil.
3. After treating, the oil can reach the new oil standard, which not only retains the active elements, but also improves the insulation of device and enhances the ability of anti-oxygen. Besides, the cost will be reduced by 90% compared with traditional way of oil-change. (Suggested that you can use the recycling device in advance before use this machine, in the case of oil withstand voltage is treated to an acceptable range, the cost will be lower and the effect will be more obvious.)
4. No.6-10 dark oil can be retrofitted to the color of No.2-4.
5. It will reduce the wastage, and enable the treated oil getting back to the specification of new oil.
30 ~ 80
3 ph 380V 60Hz (Or please contact HOPU'S presentives)
Oil Index After Treated by ZYD-I Machine
≤0.5 (no free carbon)
Dielectric loss factors